首页|资源下载
登录|注册

您现在的位置是:电子研发网 > 资源下载 > 使用模式分解方法的过孔串扰机制研究

使用模式分解方法的过孔串扰机制研究

资 源 简 介

提出了一种基于模式分解的高速互连电路中过孔串扰机制的快速求解方法.该方法将三维互连结构分解为在过孔位置处耦合的电源平面对结构和微带线结构,先单独分析3种结构,再将其级联以求解整个系统特性.与全波仿真方法相比,该方法在保证准确度的前提下,可将仿真时间从187min降低至4min.分析了电路板和过孔结构对系统性能的影响,发现频域串扰系数与电源平面结构在过孔位置处的传输阻抗成正比关系.在实际设计中,可通过减小电源平面对结构厚度、添加去耦电容和选择适当的过孔位置来减小串扰.时域仿真表明,合适的互连结构可将串扰噪声幅度降低至原有结构的2%.

A model decomposed method is proposed for efficient simulation of crosstalk between vias in high speed circuits.The 3D interconnect structure is first decoupled into a power-ground plane pair and a microstrip line structure which are coupled in the vias,then we solve each parts by using different methods,and finally,the equivalent circuits of each part are integrated to simulate the system performance.Compared with full wave simulation,the simulation time is reduced from 187 minutes to 4 minutes with considerable accuracy.The structure of the printed circuit board and vias that affect the system performance are analyzed carefully,and it is found that the crosstalk coeffici...

相 关 资 源