首页|资源下载
登录|注册

for

  • 840字节的printf不依赖编译器和库

    本代码主要是为单片机实现 --------------------------------------------------------- printf()实现前需要注意: 1、实现硬件串口初始化; 2、实现PrintPutChar()函数,即printf输出接口 3、printf只支持:%d, %u, %c, %s, %x; 4、使用时直接包含print.h即可,不使用stdio.h 5、使用时将print.h/print.c加 ...

    /dl/205582.html

    标签: printf 字节

    上传时间: 2021-05-02

    上传用户:liew

  • 嵌入式通用轴角测角平台系统的研究

    本文在对通用轴角测角平台系统的研究中,结合系统对数据处理速度及测量精度的要求高,同时系统控制也较复杂的特点,对可编程片上系统(SOPC)进行了研究。应用嵌入式处理器软核代替通用的处理器芯片,通过编程实现硬件算法替代了专用的Resolver-to—Digital解调芯片,二者结合,在Xilinx FPGA芯片内设计实现了一种嵌入式系统 ...

    /dl/205618.html

    标签: 嵌入式 通用 轴角

    上传时间: 2021-05-04

    上传用户:hanli8870

  • 交通信号灯

    仅作为参考.use for EDA

    /dl/205673.html

    标签: EDA

    上传时间: 2021-05-07

    上传用户:Adienly

  • AVR106 - C 读写Flash

    AVR106 - C Functions for Reading and Writing to Flash Memory Documentation

    /dl/205790.html

    标签: AVR106

    上传时间: 2021-05-13

    上传用户:xinsecai1688

  • 飞思卡尔2.4G PCB天线设计

    1Introduction Good antenna design is the most critical factor in obtaining good range and stable throughput in a wireless application. This is especially true in low power and compact designs, where antenna space is less than optimal. However, several compact, cost efficient, and very effective opti ...

    /dl/205957.html

    标签: pcb 天线

    上传时间: 2021-05-22

    上传用户:guanjiayi

  • Matlab-R2012a官方教程-MATLAB Coder User′s Guide

    Generate code that is compact and fast, which is essential for real-time simulators, on-target rapid prototyping boards, microprocessors used in mass production, and embedded systems.Customize the appearance of the generated code.Optimize the generated code for a specific target environment.Enable t ...

    /dl/206037.html

    标签: matlab

    上传时间: 2021-05-27

    上传用户:演技

  • 电子申请_WORD格式文件接收规范

    #if","#if |\r\n\r\n#endif";\\    "#include","#include ";"Header","// Header:\r\n// File Name: |\r\n// Author:\r\n// Date:\r\n";\\    "continue","continue;";"do","do\r\n{\r\n\t// TODO: enter the block content here\r\n\t\r\n\t|\r\n} while ();\r\n";\\    "enum","enum |\r\n ...

    /dl/206143.html

    标签: 电子 申请 _word 格式 文件 接收 规范

    上传时间: 2021-06-02

    上传用户:yzw1985

  • 多核虚拟可重构结构加速逻辑电路演化设计的研究

    提出了一种用基于多核虚拟可重构结构(MuViRaC)的内部演化硬件来加速组合逻辑电路演化设计过程的方法。其主要思想是依据增量演化中的输出函数分解策略,将一个组合逻辑电路分解为多个具有更少输出的子电路。每个子电路在MuViRaC上以两阶段并行演化的方式进行演化。MuViRaC在CeloxicaRCl000PCI板上的XilinxVirtexxcv2000EFP ...

    /dl/206200.html

    标签: 虚拟 重构 结构 加速 逻辑 电路 演化 设计 研究arallel algorithm

    上传时间: 2021-06-06

    上传用户:ssd1

  • 层次化芯片设计中的Slew违规避障修正方法

    芯片层次化物理设计给布局布线、时序收敛都带来了很大挑战。在顶层布局布线阶段,子模块相当于障碍物,当连线遇到较大障碍阻挡时,EDA工具不能够妥善处理,从而遗留较多Capacitance/Slew违规。本文从工程中遇到的实际问题出发,提出了一种Capacitance/Slew避障修正的方法,并在多个基于45 nm及65 nm工艺节点的专用集成电路项目上 ...

    /dl/206251.html

    标签: 层次化 芯片 设计 slew 规避 修正 方法局布线 避障 专用集成电路 Hierarchical physical design place and route obstacle avoiding

    上传时间: 2021-06-09

    上传用户:wudaofu

  • GD32到STM32小容量型号移植指南

    本文从各个功能模块详述了从ST小容量单片机移植到GD对应型号上要做改动的地方。比如,但就代码执行效率而言,GD32有gflash专利技术,相同工作频率下的代码执行速度会比ST快30%~40%。这样一些在ST下面编写的程序如While或者是For循环的延时,移植到GD上面来肯定相应的延时会变短。 ...

    /dl/206335.html

    标签: gd32 stm32 小容量 型号 移植 指南

    上传时间: 2021-06-14

    上传用户:zhiyi